MASK22~mask210 features low profile package ideal for automated placement ultrafast reverse recovery time low power losses, high efficiency low forward voltage drop high surge capability high temperature soldering 260 /10 seconds at terminals component in accordance to rohs 2002/95/1 and weee 2002/96/ec mechanical date major ratings and characteristics case: jedec msma molded plastic body over glass passivated chip terminals: solder plated, solderable per j-std-002b and jesd22-b102d polarit y : laser band denotes cathode end v f 0.50v,0.55v,0.70v,0.85v t j max. 125 c i f(av) 2.0 a v rrm 20 v to 100 v i fsm 50 a y maximum ratings & thermal characteristics (t a = 25 c unless otherwise noted) note 1: mounted on p.c.b. with 0.2 x 0.2? (5.0 x 5.0mm) copper pad areas. electrical characteristics (t a = 25 c unless otherwise noted) note 2: pulse test:300 s pulse width,1% duty cycle. v/s 10000 reverse current v r =v dc t a =25 t a =100 i r 0.5 10 ma mask28~ mask210 unit instantaneous forward voltage i f =2.0a (2) v f 0.50 0.55 0.70 0.85 v operating junction and storage temperature range t j t stg ?65 to +125 items test conditions symbol mask 22 mask23~ mask24 mask25~ mask26 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 50 a thermal resistance from junction to lead (1) r jl 35 /w voltage rate of change (rated v r ) dv/dt 60 80 100 v maximum average forward rectified current i f(av) 2.0 a 42 56 70 v maximum dc blocking voltage v dc 20 30 40 50 60 80 100 v maximum rms voltage v rms 14 21 28 35 mask 26 mask 28 mask 210 unit maximum repetitive peak reverse voltage v rrm 20 30 40 50 j items symbol mask 22 mask 23 mask 24 mask 25 http://www.trr-jx.com surface mount schottky rectifiers
characteristic curves (t a =25 unless otherwise noted) http://www.trr-jx.com MASK22~mask210 surface mount schottky rectifiers
package outline notice product is intended for use in general electronics applications. product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. the absolute maximum ratings are rated values and must not be exceeded during operation. the following are the general derating methods you design a circuit with a device. i f(av) : we recommend that the worst case current be no greater than 80% . i fsm : this rating specifies the non-repetitive peak current. this is only applied for an abnormal operation, which the general during the lifespan of the device. t j : derate this rating when using a device in order to ensure high reliability. we recommend that the device be used at a t j of below 125c. trr is registered trademark of rising-sun technology. rising-sun te chnology reserves the right to make changes to any product i n this specification to improve reli ability,functional characterist ics,or design without notice. rising-sun technology does not assure any liability arising out of the applic ations or any product descr ibed in this specificat ion. rising-sun technology advises customers to obtain the latest vers ion of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com MASK22~mask210 surface mount schottky rectifiers
|
